Kruselings miniature plate of food
306 Views

If you want to know about making a miniature plate of food for your Kruseling doll then this post may interest you. I’m always looking at ways for making miniature accessories for my dolls. There are lots available on the internet but it can work out expensive if, like me, you’re looking to build up a good and varied collection.

I was on the hunt for some plates of food and after not being able to find what I wanted, I set about making them myself. I found plenty of 1/12th scale, but not 1/6th which is the size needed for Kruselings (or Mini Amigas, or Barbies).

To make the miniature plates of food I figured that I would need 4 plates, food, glue, tweezers and varnish. I already had the glue, tweezers and varnish, so I scoured online (including eBay and Amazon) for the right size plates and food but again, search results were not quite what I wanted.

Quite by chance I came across nail art accessories that resembled fruit slices and they looked the right size so I took a chance and ordered them. I intended using milk carton tops for plates but they were a bit too deep for displaying the food.

I’m lucky to have a handy husband who made me some aluminium plates to the exact diameter I wanted, otherwise I’d have probably gone with buying 1/12th scale from eBay, which would have been fine for a tea plate but I wanted a dinner size plate.

Materials & Tools Used to Make a Miniature Plate of Food

  • 32mm diameter plates
  • Nail Art Decoration Fimo slices (£2.99 incl postage from uk_beauty_supplies on eBay)
  • PVA glue
  • Small paint brush
  • Reverse action tweezers.

Method:

1) Prepare the fimo fruit slices according to how you want them laid out to get an idea of how many will fit the plate. I chose lines of overlapping slices. (My pack contained 12 compartments of at about 10 slices in each and my plates have 21,29, 31, 33 slices on them).

2) Work on 1 plate at a time and place a thin layer of glue on it using a small paint brush. (I think my slices are 1mm thick and I made the glue layer the same thickness.)

3) Use the reverse action tweezers to pick up the fimo slice and place it on the plate. (A second pair of ordinary tweezers also helps to steady the plate when doing this.)

4) Leave to dry completely. A coat of clear nail varnish on top will give a shiny glaze and finish it off nicely.

If you have the patience to make your own plates, I found some great YouTube videos for making them;

  1. This one uses plain 300gsm card and nail varnish.
  2. This one uses plain card.
  3. This one makes fancy plates using a computer print out.

Here’s Vera #Kruseling preparing lunch for her friends!

%d bloggers like this: